cyclic softening

基本解释

• [能源科学技术]循环软化
• [机械工程]循环软化
• [物理学]循环软化

英汉例句

双语例句

• The results show that the matrix in the microstructure occurs dynamic recovery and recrystallization and the materials generate cyclic softening during thermal cycling.
  结果表明，在热循环过程中基体组织发生动态回复和再结晶，材料产生循环软化；
• Its cyclic properties first show cyclic softening, after stabilizing, then cyclic hardening. The state of cyclic softening and cyclic hardening will vary along with strain level.
  其循环相关特性表现为先循环软化，稳定后又发生循环硬化，而且循环软化和循环硬化的程度随控制应变的不同而不同。
• Based on the results of cyclic softening and cyclic creeping tests at room temperature, the resilient relaxation tendency of the most commonly used spring steels were discussed in the paper.
  本文从循环软化和循环蠕变两个不同侧面对常用弹簧钢的弹性松弛趋势进行了对比试验研究并对它们的弹性松弛趋势大小进行了初步评价。

• cyclic softening更多例句

词组短语

短语

• cyclic harding softening 循环硬化
• cyclic hardening softening 循环硬化
• cyclic strain softening curve 循环应变软化曲线
• cyclic hardening and softening 循环硬化与软化

• cyclic softening更多词组

专业释义

能源科学技术

• 循环软化

  The details are presented as follows. At different stress amplitudes (i. e. , HCF regime, LCF regime and in-between regime), cyclic softening occurs in each case, and this phenomenon takes place more significantly with increasing stress amplitude.
  在不同应力幅和不同度温度下其疲劳和损伤行为表现出明显不同的特点,具体表现如下：在不同应力幅下(即：高周疲劳区、低周疲劳区和介于高低周疲劳区之间)均发生了循环软化现象,而且随着应力幅的增加循环软化发生得更显著。

  机械工程

• 循环软化

  The experimental results show that the PTFE is a rate-dependent material. Cyclic softening is found to exist under pure torsion loadings, and the PTFE has noticeable non-Masing behavior.
  实验表明,PTFE是率相关材料,在剪切方向呈现循环软化,并且有明显的non-Masing特征。

  物理学

• 循环软化